Oven bake oven out of a lot of products, if the oven drying room poor quality will directly affect the quality of the product specific. The following describes some of the use of oven drying room, and I hope that we can help. 1. Before applying the necessary attention to the supply voltage can be used in line. When used, the power required by the rules to stop outlet ground wire to ground. 2. When electricity use, avoid touching the box on the left hand part or appliance space wiping with a damp cloth and rinse with water, cut off the power supply should be tested. 3. The power cord can not be wrapped around the metal, can not be set at a low temperature or humid central avoid rubber aging resulting in leakage. 4. Do not place items inside too crowded, it is necessary to leave space for the natural convection in the atmosphere, the wet atmosphere could slow down in the wind on top of escape. 5. conditioner temperature should reflect the current silver contacts scared whether or uneven, if available thin gauze contacts sand flat, and then use, and should always wipe with a clean cloth, making good contact (note required cut off the power). Metal pipes conditioner indoor temperature never hit so the impact of flexibility. 6. In no proof installation of dry box, do not put flammable materials. 7. After each use, shall cut off the power of local, often insist on clean inside and outside the box. Changzhou belt dryer, oven drying room, Changzhou kiln www.cxgzsb.com